Circulute ® Series II Speed Reducer
The Circulute ® Series II Speed Reducer is a
cycloidal speed reducer, utilizing 52100 grade bearing steel on all of
its speed reduction components. It is offered with a full two year warranty,
not limited by hours of operation, and is able to endure abuse that would
break the teeth of ordinary speed reducers. The Circulute ® Series II
features a compact design with ratios of 11:1 to 71:1 in a single reduction
at 95% operating efficiency.
We also offer washdown modifications, top mount
adaptors, servo and IEC inputs. Contact Shimpo for additional information.
Applications suited for the Circulute ® Series
II include rotary valves, rotary feeders, steel industry run-out tables,
mixers, grinders, dryers, and conveyors.
Same Day Shipment on all Stock Reducers!
| Features |
Benefits |
| Higher torque
ratings |
Yields longer
product life |
| 500%
shock load capacity |
Teeth
won't break, even in the most difficult industrial applications |
| Straddle
mounted output shaft bearings |
Provides
up to 40% higher overhung load capacity over competitive cycloidal reducers |
| Quill
style NEMA C-face input |
Uses
standard off-the-shelf motors with the shortest possible overall length
and for easy and low cost maintenance |
| Grease
lubrication |
Can
be mounted in any position without modifications or changing oil breathers,
drains, and level plugs |
| Low
input shaft inertia |
Use
a smaller reducer for servo and stepper motor applications |
|
Specifications
|
|
22 basic sizes, available as single, double and triple reduction units
|
|
Input power range from 1/8 HP (.1 kW) to 60 HP (45 kW)
|
|
Ratio range from 11:1 to 357,911:1
|
| Output torque range from 100
in. lbs. (11 Nm) to 50,000 in. lbs. (5,646 Nm) |
|
PRODUCTS