D-Sub Connector
	Gland Nut	MS Connector, Protective Cap and Anti-rotation Flex Mount

Design Features

• Slim Line Profile Only 1.36" In Depth
• MS Connector or Cap Style Profile
• Thru-shaft Design For Easy Mounting
• Designed For Industrial Environments
• Exceeds Electrical Noise Immunity and Electrostatic Discharge Standards
• CE Marking Available
• Quadrature Output Wave Form
• Resolutions to 4096
• 100 Degrees C Operating Temperature Optional
• Bore Options to 1.875"
• Pull-up Resistor, Open Collector, Push-Pull & Differential Line Driver Output Options 5-28 VDC

The Model 776 slim line thru shaft encoder is a hollow shaft unit designed to fit directly either on a motor shaft or other shafts where position, direction, or velocity information is needed. The Model 776 is available in large bore sizes from 35 mm to 1.875". The Model 776 features a single-screw clamp type mount for fast and easy mounting. An optional anti-rotation flex mount maintains housing stability. Long disk life is assured by the rugged, shock resistant code disk. Electrical features include standard line driver (5-28 VDC), open collector, pull-up resistor, and push-pull output circuits; over voltage protection, and optional 100 degrees centigrade operating temperature. Electrical connections are made through a 24" cable with gland nut,10-pin MS style connector, or 9-pin D-sub connector.

Applications

• Motion Control Feedback
• Food Processing
• Textile Machines
• Machine Control
• Process Control
• Position Control
• Conveyors
• Elevator Controls
• Robotics
• Material Handling
• Velocity Control