Gland Nut
	MS Connector, Protective Cap and Anti-rotation Flex Mount
	D-Sub Connector

Design Features

• Slim Line Profile Only 0.840" In Depth
• Clamp Style Profile Only 1.31" In Depth
• MS Connector or Cap Style Profile
• Thru-shaft Design For Easy Mounting
• Designed For Industrial Environments
• Exceeds Electrical Noise Immunity and Electrostatic Discharge Standards
• CE Marking Available
• Quadrature Output Wave Form
• Resolutions to 4096
• 100 Degrees C Operating Temperature Optional
• Bore Options to 1.375"
• Pull-up Resistor, Open Collector, Push-Pull & Differential Line Driver Output Options 5-28 VDC

The Model 775 slim line thru shaft encoder is a hollow shaft unit designed to fit directly either on a motor shaft or other shafts where position, direction, or velocity information is needed. The Model 775 is available in large bore sizes to 1.375". The Model 775 features a collet type mounting clamp for bore sizes to 1.000" and a single-screw clamp type mounting for bore sizes to 1.375". An optional anti-rotation flex mount maintains housing stability. Long disk life is assured by the rugged, shock resistant code disk. Electrical features include standard line driver (5-28 VDC), open collector, pull-up resistor, and push-pull output circuits; over voltage protection, and optional 100 degrees centigrade operating temperature. Electrical connections are made through a 24" cable with gland nut,10-pin MS style connector, or 9-pin D-sub connector.

Applications

• Motion Control Feedback
• Food Processing
• Textile Machines
• Machine Control
• Process Control
• Position Control
• Conveyors
• Elevator Controls
• Robotics
• Material Handling
• Velocity Control